 | LynceeTec.Interfaces Namespace |
Classes
Structures| Structure | Description | |
|---|---|---|
 | MZone |
Interfaces| Interface | Description | |
|---|---|---|
 | IBaseManager | |
| ICalibrationProcessingConfig |
Interface representing a calibration row in the ProcessingConfig table of the database
|
| ICameraConfig |
Interface representing a row in the Camera Config table of the database
|
| ICameraController |
Interface to the camera controller. Access to the camera is done using this interface.
|
| ICameraHardwareInfo |
Interface representing a row in the CameraHardwareInfo table of the database
|
| ICameraHologramSource |
Interface for objects providing hologram images from a camera.
|
| ICameraMemorySource | |
| ICameraMemoryStream | |
| ICameraStream | |
| IChildSequenceWriter | |
| IConfigManager | |
| ICycleDevice | |
| IDataSetForEnabledModuleCFG | |
| IDataSetForStageConfigurationFile | |
| IDHMConfigFiles | |
| IDHMConfiguration |
Interface for a complete set of parameters for the hardware of a DHM device
|
| IDHMDevice |
Interface for the DHMDevice classes
|
| IDHMDeviceComponent | |
| IDHMHardwareItemsUsage | |
| IDHMParameters |
Subset of the database parameters that are necessary to initialize a DHM device object
|
| IDigitalPhaseMask | |
| IDigitizer | |
| IDigitizerEventArgs | |
| IEnabledModules |
Interface for an object showing which modules of the DHM are enabled.
|
| IEnvironmentManager | |
| IFactorySetting |
Interface for all the factory settings table in the database. These aren't owned, and can only be edited
by a System user
|
| IFluoFilterWheel | |
| IHardwareConfiguration |
Interface for the configuration of the hardware of a DHM device
|
| IHardwareTableDataTable | |
| IHologramLoader |
Interface for objects able to load a hologram image from the drive.
|
| IHologramSource |
Interface for objects providing hologram images.
|
| IHologramSourceCombiner |
Interface for objects able to provide hologram images coming either from the drive or from the camera.
|
| IHolographicMeasurementConfig | |
| IHoloMeasure | |
| IHoloOptimizerMax | |
| IHoloOptimizerMinMax | |
| IInstalledLaserSourcesInfo |
Interface representing a row in the Installed Laser Sources table of the database
|
| IItemUsage | |
| ILaserSource | |
| ILaserSourceInfo | |
| ILaserSourcesController |
Interface for the laser sources manager. Access to each laser source is done using this interface.
|
| ILogicalSourceState | |
| ILynceeDataSet |
Interface for the rows of all the tables in the database
|
| IMask | |
| IMaxEstimator | |
| IMeasureDisplay | |
| IMeasurementConfig | |
| IMotorConfig | |
| IMotorHardwareInfo |
Interface representing a row in the Motor Hardware Info table of the database
|
| IMotorizedDevice | |
| IMotorsManager |
Interface for the motors manager. Access to each motor is done using this interface.
|
| INamedConfig | |
| IObjectiveInfo |
Interface representing a row in the Objective Info table of the database
|
| IObjectiveSourceCalib | |
| IOwner |
Interface for all the database tables whose elements have an owner. Only the owner or a higher level
user can edit or delete them
|
| IParameterReader | |
| IParameterWriter | |
| IPhaseMaskCoefs | |
| IProcessingConfig |
Interface representing the common elements of a calibration and user processing row in the ProcessingConfig table of the database
|
| IProfileData | |
| IProfileMapping | |
| IProgressDialog | |
| IProgressReporter |
Lyncée Tec provider for progress report
|
| IReconstruction | |
| IRoughnessDisplay | |
| IRoughnessSettings | |
| ISampleCorrectionConfig | |
| ISampleInfo |
Interface representing a row in the Sample table of the database
|
| ISaveRevert | |
| IScanningConfiguration | |
| ISequenceFrameInfo | |
| ISequenceFrameInfoProvider | |
| ISequenceReaderT, TBuf | |
| ISequenceReconstructionInfo | |
| ISequenceTimestampList | |
| ISequenceTimestampReadWriteProvider | |
| ISequenceTimestampsReader | |
| ISequenceTimestampsWriter | |
| ISequenceWaiter | |
| ISequenceWriterT, TBuf | |
| IStage | |
| IStageInfo | |
| IStageXYZ |
Interface for the XYZ stage.
|
| IStitchingFactory | |
| IStroboChannelInfo | |
| IStroboFrameInfo | |
| IStroboscopicUnit | |
| ITurret | |
| ITurretManager |
Interface for the turrets manager. Access to each turret is done using this interface.
|
| IUSBDevice | |
| IUser | |
| IUserInfo | |
| IUserManager | |
| IUserPermissionState | |
| IUserProcessingConfig |
Interface representing a user processing row in the ProcessingConfig table of the database
|
Delegates| Delegate | Description | |
|---|---|---|
 | CycleHandler | |
| EndCycleHandler | |
| MoveDoneHandler | |
| OnFrameReadHandler | |
| OnSequenceEndHandler | |
| ProgressHandler |
Enumerations| Enumeration | Description | |
|---|---|---|
 | AutoFocusMethod | |
| Axis | |
| CalibrationDirection | |
| CameraTriggerEdge | |
| CameraTriggerSource | |
| Colormaps | |
| CycleStatus | |
| DigitizerType | |
| EposCommType | |
| FrequencyScanningMode | |
| HardwareItemUsage |
Enumerates possible usages for a hardware item
|
| ImagesDataType | |
| LaserAndBoardType | |
| LaserBeamType | |
| MaskMethod | |
| MicroscopeType |
Gives the optical configuration - originally called Microscope Type - of the DHM (reflection or transmission mode)
|
| ModuleStroboType | |
| MotorizedDevicesType | |
| MotorPositioningType |
Enumerates the possible types of positioning of a motor
|
| OperationMode | |
| OPLsAssembly |
Gives the hardware assembly type of the OPLs, whether they are mounted in cascade (series) or separately (parallel)
- i.e if they interact together or independently
|
| phaseFitMethod | |
| phaseFitPolyBase |
Phase fitting method for 2D tilt correction
|
| PhaseFlatteningMethod | |
| PhaseUnwrappingMethod |
Identifiers for unwrapping methods
|
| PhysUnit | |
| ProductType |
Gives the product type chosen (Transmission DHM, Reflection DHM, and DHM Camera).
It is different from the optical configuration (even if it is strongly linked): e.g. one could choose to have a DHM Camera with a reflection optical configuration and not a transmission one.
This list can be extended.
|
| ProfileData |
Identifiers for profile data
|
| ProfileDataConversion |
Identifiers for the unit conversions for profile data
|
| PulseSource | |
| SequenceType | |
| StageCode | |
| StroboscopicMode | |
| TriggerExposureMode | |
| TurretDhmPosition | |
| TurretType | |
| UserLevel |
User accounts levels for logging in
|
| windowsList |
Identifiers for hologram, phase, amplitude, and Fourier images.
|