 | DHMDeviceBase Class |
Base class for the DHM Device
Inheritance HierarchyNamespace: LynceeTec.DHM
Assembly: LynceeTec.DHM (in LynceeTec.DHM.dll) Version: 8.1.17212.0 8_1_dev af417e8, built 2019-10-03 13:47:41 UTC
SyntaxThe DHMDeviceBase type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Camera |
Gets the camera controller. Access to the camera is done through this property.
|
| HoloSource |
Gets a hologram source which can provide both holograms coming from the drive and from the camera.
|
| IsHardwareAvailable |
Gets a value indicating whether the enabled physical hardware was detected and is available.
|
| IsLoggedIn |
Gets a value indicating whether a user is logged in.
|
| LaserSourcesController |
Gets the laser sources controller. Access to each laser source is done through this property.
|
| Motors |
Gets the motors manager. Access to each motor is done through this property.
|
| OperationMode | |
| SerialNumber |
Gets the serial number of the DHM
|
| Stage |
Gets the stage controller. Access to the camera is done through this property.
|
| TurretManager |
Gets the turret manager. Access to each turret is done through this property.
|
Methods| Name | Description | |
|---|---|---|
 | Dispose | Releases all resources used by the DHMDeviceBase |
| InitDhm |
Initializes the DHM hardware components in parallel.
Only available after logging in. (See Login(IUser))
Asynchronous function.
|
| InitDhmSerial |
Initializes the DHM hardware components one after the other.
Only available after logging in. (See Login(IUser))
Asynchronous function.
|
| LoadConfig(IDHMConfiguration, ISampleInfo, IProgressReporter) |
Loads a configuration and sets the hardware parameters accordingly.
Can only be called after initialization is done.
Asynchronous function.
|
| LoadConfig(IDHMConfiguration, DictionaryMotorizedDevicesType, Single, IProgressReporter) |
Loads a configuration and sets the hardware parameters accordingly.
Can only be called after initialization is done.
Asynchronous function.
|
| LoadSampleConfig |
Loads the sample configuration.
Can only be called after initialization is done.
Asynchronous function.
|
| Login |
Logs an authenticated user in the DHM device.
|
| Logout |
Logs out the user and resets the initialization of the device
|
| UnloadConfig |
Unloads the measurement configuration. This does not modify anything in the hardware, but reset fields
|
See Also